Vinyl cutter

From Rockford MakerSpace Wiki
Revision as of 22:51, 4 October 2017 by Rob Wise (Talk | contribs) (Notes)

Jump to: navigation, search

Back to Tools and Equipment


US Cutter MH871-MK2

Cost To Use

  • No charge; member must provide own consumable materials


  • Restricted to Members Only
  • You MUST BE TRAINED before using it alone. Ask for help from those who have been trained, and contact the Area Captain to set up an appointment for your training.


  • Maximum Cut Width: 30.63“
  • Maximum Cut Length: 8 feet
  • What it can cut: standard vinyl, heat transfer vinyl, paint msk
  • Blade Types: standard blade compatible
  • Command sets: DM-PL HP/GL automatic identification
  • Motor Type: stepper
  • Speed: 39 in/s
  • Max Force: 350g
  • Included Software: Sure Cuts A Lot Pro
  • Preferred file format: .svg
  • Included Accessories: USB Cable, power cable, blade holder, pen holder, 3x 45° blade

Accessories Available

  • picks, squeegees, hobby knives, cutting mat
  • vinyl stock, transfer tape

Recommended Settings

  • Pressure: 8g
  • Speed: 100mm/s

Materials Information

  • Current vinyl in stock: 4mm adhesive vinyl

Current Status

  • Not available


On loan from Rob Wise