Manual benchtop lathe with tools

From Rockford MakerSpace Wiki
Jump to: navigation, search
MX-210V.jpg
Back to Tools and Equipment

Make/Model

MX-210V

Cost To Use

  • No charge; member must provide own consumable materials
  • Restricted to Members Only

Notes

  • Restricted to Members Only
  • You MUST BE TRAINED before using it alone. Ask for help from those who have been trained, and contact the Area Captain to set up an appointment for your training.

Settings and tutorial on using it.

Specs*

  • Swing Over Bed: 8-1/4" (210 mm)
  • Cross Slide: 4-5/8" (117 mm)
  • Distance Between Centers: 15-3/4" (400 mm)
  • Motor Power: 750W
  • Spindle Speed Ranges: Low 50-1250, high 100-2500 RPM
  • Travel: compound rest 2-1/8" (54 mm), cross slide 3" (76 mm)
  • Tailstock: Taper MT#2
  • Tail Sleeve: φ1" (25 mm)
  • Hole Thru Spindle: φ0.83" (21 mm), taper MT#3
  • Feed Speeds: (3) 0.0037"-0.0071"/rev
  • Inch Threads: 8-44 TPI
  • Metric Threads: 0.5-3.0 mm
  • Footprint: 31-1/2" x 10-1/2"
  • Spindle Accuracy: 0.0004-0.0012" (0.01-0.03 mm)
  • Main Engine Gross Weight: 128 lbs
  • Standard Equipment
    • 4" 3-Jaw and 4-jaw chucks
    • Steady rest & follow rest
    • 4-Way turret tool post (3/8" max tool size)
    • MT#2 & MT#3 dead centers

* Note: Specs obtained online; accuracy not guaranteed

Materials Information

Current Status

Available.

Ownership

Purchased by TAC/Rockford MakerSpace

History

  • 10/07/20 - Arrived at Makerspace

Documentation